Scoupe L4-1468cc 1.5L SOHC (8 VALVE) (1991)
/Page-1065002.png)
To test the Check Engine Light, located in the instrument cluster, turn the ignition switch on. The light should illuminate. This insures that the light is
operative. If the light bulb does not illuminate the most likely fault is a defective light bulb. If the light tests good the other possible causes are, the ECU
not supplying power (check pin #14 of connector C30-2), the wiring harness or instrument cluster printed circuit board (refer to ELECTRICAL AND
ELECTRONIC DIAGRAMS).
