Scoupe L4-1468cc 1.5L SOHC (8 VALVE) (1991)
/Page-1090007.png)
TIGHTENING TORQUE:
Fuel line banjo bolt to fuel filter: 18-25 lb.ft
13.
Apply battery voltage to the fuel pump drive terminal to operate the fuel pump and check for any fuel system leaks.
14.
After finishing service procedures, proceed to the underhood labeling instructions.
Underhood Label Instructions
1.
Open the drivers door and place a punch mark over the 11th character on the B-pillar identification plate. This will indicate that the campaign
procedures have been completed.
2.
On the Authorized Modifications Label, you will need to write in the following information:
