Scoupe L4-1468cc 15L SOHC (8 VALVE) (1991) Idle Speed TSBs - Page 4988
The repair kit should only be installed if the engine initial start stalling condition remains after checking all of the items listed above.
The repair kit (Part No.39901-24Q20D) consists of a modulator, extension harness, adapter and two tie straps.
ILLUSTRATION OF REPAIR KIT:
REPAIR KIT INSTALLATION LAYOUT
NOTE:
Red tape on extension harness indicates ECU side of harness.
INSTALLATION INSTRUCTIONS:
1.
Turn the ignition switch off and disconnect the battery negative terminal. Be sure to record customers radio stations prior to battery disconnect.
2.
Remove the lower crash pad assembly on the driver's side.