Scoupe L4-1468cc 1.5L SOHC (8 VALVE) (1991)
/Page-222003.png)
12.
Reinstall the ECM, adapter and the modulator(s) as assembled and connect the control harness connectors to the adapter.
13.
Reinstall the relay box and control relay.
14.
Reinstall the lower side of the crash pad.
15.
Reconnect the negative battery terminal and start the engine to ensure operation. Reset the customer's preset radio stations and clock.
16.
Proceed to the catalytic converter inspection.
Catalytic Converter Check Procedures
The following procedures are for inspecting and, if necessary, replacing the catalytic converter.
1.
Loosen the 2 bolts and 2 nuts and remove the catalytic converter from between the two exhaust pipes.
2.
Check the catalytic converter for evidence of damage:
^
Internal rattling noise when shaking the catalytic converter.
^
Crack in the catalyst monolith.
^
Mat which covers the catalyst cannot be seen.
^
No catalyst biscuit present.
^
Light cannot be seen when looking through the catalytic converter.
^
Catalyst has been partly broken or the bottom side of it has sunk when seen from the front flange of the catalytic converter.
