Scoupe L4-1468cc 1.5L SOHC (8 VALVE) (1991)
/Page-1674001.png)
Clutch Disc: Service and Repair
REMOVAL
1. Drain the clutch fluid and transaxie gear oil.
2. Remove the transaxie assembly.
3. Insert the special tool (09411-11000) in the clutch disc to prevent the disc from falling.
4. Loosen the bolts which attach the clutch cover to the flywheel in a star pattern. Loosen the bolts in succession, one or two turns at a time, to avoid
bending the cover flange.
NOTE: DO NOT clean the clutch disc or release bearing with cleaning solvent.
