hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

ABOUT US
Engine - Stalls On Initial Cold Start|Page 7037 > < Engine - Stalls On Initial Cold Start

Scoupe L4-1468cc 1.5L SOHC (8 VALVE) (1991)

Page 2
background image

1.

Connect the RS232 cable to the 9-pin COM port on the back of HDS.

2.

Connect the other end of the RS232 cable to the COM port on the left side of the Hi-Scan.

3.

Provide power to the Hi-Scan using the cigarette lighter power adapter.

4.

Insert only the software card you (wish to update into the Hi-Scan.

Engine - Stalls On Initial Cold Start|Page 7037 > < Engine - Stalls On Initial Cold Start