Scoupe L4-1468cc 1.5L SOHC VIN J MFI (1994)
Water Pump: Service and Repair
1. Disconnect battery ground cable.
2. Drain cooling system, then remove drive belt.
Fig. 39 Water Pump Assembly
3. Remove water pump pulley, Fig. 39.
4. Remove timing belt cover and tensioner.
5. Remove water pump mounting bolts, then the alternator support brace.
6. Remove water pump assembly.
7. Reverse procedure to install, noting the following:
a. Tighten water pump mounting bolts to specifications
b. Install timing belt tensioner, then adjust belt tension as outlined under Timing Belt procedure.
