Scoupe L4-1468cc 1.5L SOHC VIN J MFI (1994)
3)
Remove and discard the discharge hose with aluminum fittings and replace with the new hose with steel fittings. Ensure the fitting 0-rings are
lubricated with PAG oil and properly seated.
4)
Reconnect compressor to discharge hose fitting-2.
Tightening torque: 20-3O N-m (200-300 kg-cm, 14-22 lb.ft.).
5)
Add 15cc (0.5 US Fl.Oz). refrigerant oil through fitting-1 of the discharge hose and immediately connect it to the discharge pipe fitting.
Refrigerant Oil: PAG oil FD46XG or equivalent
Tightening Torque: 10-15 N-m (100-150 kg-cm, 7 - 11 lb.ft.).
6)
Evacuate and recharge the A/C system with 700 grams (1.5 lbs.) of R134a refrigerant. (Refer to the shop manual)
7)
Check the fittings for refrigerant leakage with an electronic leak detector. (Refer to the shop manual).
PARTS INFORMATION
CAMPAIGN CLAIM INFORMATION
