Scoupe L4-1468cc 1.5L SOHC VIN J MFI (1994)
8.
Reposition the upper board into the connector and snap the tabs into place. Then place the plastic sheet over the top board and then the cover over
the base. Turn the ECM upside down and bend the ten tabs down to fasten the base to the cover. Reinstall the retaining pin.
9.
Reinstall the ECM into the vehicle.
10.
Open the door and place a punch mark over the 11th character on the B-Pillar identification plate. This will indicate that the campaign procedures
have been completed.
EFFECTIVE PRODUCTION DATE:
1993 ALL
1994 thru 12/30/93 production.