Scoupe L4-1468cc 1.5L SOHC VIN J MFI (1994)
-
Using a stethoscope, check the injectors for a clicking sound at idle. Check that the sound is produced at shorter intervals as the engine speed
increases.
NOTE: Ensure that the sound from an adjacent injector is not being transmitted along the delivery pipe to an inoperative injector.
-
If a stethoscope is not available, check the injector operation with your finger. If no vibrations are felt, check the wiring connector, injector, or
injection signal from engine control module.
3. Measure resistance Measurement Between Terminals.
-
Disconnect the connector at the injector.
-
Measure the resistance between terminals.
Standard value: 15.55 - 16.25 ohms at 20° C (68° F)
-
Connect the connector to the injector.