Scoupe L4-1468cc 1.5L SOHC VIN J MFI (1994)
10.
Push the wiring harness back through the firewall and reinstall the grommet. Reconnect all electrical connectors disconnected in steps 2 and 3 and
reattach the square ECM wiring loom cover to the intake manifold surge tank.
11.
Verify that all wiring harnesses are clear of moving parts or hot components.
12.
Clean off throttle body carbon deposits per procedure given in fuel system section of the appropriate shop manual. Clean TP Sensor connector at
throttle body by disconnecting and spraying with electrical contact cleaner.
13.
Set the idle speed and TP Sensor according to the procedures given in the fuel system section of the appropriate shop manual.
SPECIFICATIONS:
TP Sensor = 480 - 520 mV
IDLE SPEED = 750 RPM
MP Sensor = 900 - 1000 mV
