Scoupe L4-1468cc 1.5L SOHC VIN J MFI (1994)
10.
Open the door and place a punch mark over the 11th character on the B-Pillar identification plate. This will indicate that the campaign procedures
have been completed. Proceed to step 1 of the Modification Label and Proof of Correction Form Instruction Section of this TSB.
PARTS INFORMATION
Modification Label and Proof of Correction Form Instructions
1.
An authorized Modifications Label will need to be applied to the underside of the hood. Wipe the surface dean before applying the new label.
2.
On the Authorized Modifications Label, you will need to write in the following information:
CHANGE AUTHORITY: 018
DEALER CODE: YOUR DEALER CODE
REPAIR DATE: THE DATE OF THE REPAIR
Remove the backing from the clear adhesive on the front of the label, and press down on the label.
