Scoupe L4-1468cc 1.5L SOHC VIN J MFI (1994)
Alignment: Specifications
Front Wheel Alignment Specifications
MANUAL STEERING
Caster Angle, Deg.:
Limits .......................................................................................................................................................................................... +7/12 to +1 7/12
Desired ....................................................................................................................................................................................................... +1 1/12
Camber Angle, Deg.:
Limits ................................................................................................................................................................................................... -2/3 to +1/3
Desired .............................................................................................................................................................................................................. -1/6
Toe, Inch [01] ......................................................................................................................................................................................... -0.08 to +0.16
King Pin Inclination, Deg. ............................................................................................................................................................................... 13 7/30
Steering Angle, Deg.:
Inner Wheel ................................................................................................................................................................................................ 37 2/15
Outer Wheel ............................................................................................................................................................................................. 31 31/60
Ball Joint Inspection .............................................................................................................................................................................................. [04]
POWER STEERING
Caster Angle, Deg.:
Limits ....................................................................................................................................................................................... +1 7/30 to +2 7/30
Desired ..................................................................................................................................................................................................... +1 11/15
Camber Angle, Deg.:
Limits ................................................................................................................................................................................................... -2/3 to +1/3
Desired .............................................................................................................................................................................................................. -1/6
Toe, Inch [01] ......................................................................................................................................................................................... -0.08 to +0.16
King Pin Inclination, Deg. ............................................................................................................................................................................... 13 7/30
Steering Angle, Deg.:
Inner Wheel ................................................................................................................................................................................................ 37 2/15
Outer Wheel ............................................................................................................................................................................................. 31 31/60
Ball Joint Inspection .............................................................................................................................................................................................. [04]
[01] -- Toe-in (+); toe-out (-).
[04] -- Refer to Suspension for ball joint inspection procedure.
