Sonata V6-2.7L (2004)
Fuse Block: Testing and Inspection
INSPECTION
1. Check for a blown fusible link with an ohmmeter.
2. If a fusible link burns out, there is a short or some other problem in the circuit. Carefully determine the cause and correct it before replacing the
fusible link.
CAUTION: The fusible link will burn out within 15 seconds if a higher than specified current flows through the circuit.
INSPECTION OF FUSES
When a fuse is blown, there are two probable causes. The two causes can easily be determined by a visual check after removing the fuses.
1. Fuse blown due to over-current
Prior to replacing the fuse with a new one, check the circuit for a short and the related parts for abnormal conditions.
Only after the correction of a short or replacement of abnormal parts, should a fuse with the same ampere rating be installed.