Sonata V6-2.7L (2004)
3. Loosen the bolts of the accelerator arm bracket and remove.
INSPECTION
1. Check the inner and outer cable for damage.
2. Check the cable for smooth movement.
3. Check the accelerator arm for deformation.
4. Check the return spring for deterioration.
5. Check the connection of the bushing to end metal fitting.
6. Check that the accelerator switch operates properly.
7. Measure the resistance of the injectors between the terminals using an ohmmeter.
Resistance: 13-16 Ohms [at 20 °C (68 °F)]
8. If the resistance is not within specification, replace the injector.
INSTALLATION
1. When installing the return spring and accelerator arm, apply multi-purpose grease around each moving point of the accelerator arm.
