Sonata V6-2.7L (2004)
9.
When the "REPROGRMMING COMPLETED" message is displayed, check the new ECM ID displayed on the Hi-Scan Pro screen to verify that
the correct ECM software has been downloaded. Refer to the ECM SPECIFICATIONS in this TSB for the ECM ID listing.Turn the Hi-Scan Pro
OFF and the process is complete.
10.
When the reprogramming is completed successfully, turn the ignition to the OFF position and then start the engine to check for proper operation.
11.
Check for DTC using the Hi-Scan Pro with system software card and erase any DTC.
ERROR MESSAGE EXPLANATION:
1.
"INVALID PASSWORD" : Please enter the correct password for the automatic update mode again (1229).
2.
"REPROGRAMMING ERROR PLEASE WAIT FOR RETRY" : An error occurred during reprogramming, the Hi-Scan Pro will retry the
reprogramming automatically.
3.
"THIS ECM IS DIFFERENT TYPE" : The ECM on this vehicle is not the type subject to this reprogramming procedure.
4.
"ALREADY REPROGRAMMED" : The reprogramming has previously been done on this vehicle.
5.
"REPROGRAM ERROR PLEASE CHECK SYSTEM": In this case you must reprogram manually by selecting menu option "02. EF 2.7
03~05MY INTERMITTENT [ERROR]".
6.
WARRANTY INFORMATION:
