Sonata V6-2.7L (2004)
8.
The Hi-Scan Pro reinitializes the ECM.
9.
When the "REPROGRAMMING COMPLETED" message is displayed, the process is complete. Check the new ECM ID displayed on the
Hi-Scan Pro screen to verify that the correct ECM software has been downloaded.
NOTE:
Refer to the "ECM SPECIFICATIONS" Table for the ECM ID listing.
10.
Turn the ignition to the OFF position for 20 seconds and then start the engine and check for proper operation.
11.
Check for diagnostic trouble codes using the Hi-Scan Pro with the system software card. Erase all trouble codes.
Explanation of Error Message
1.
"INVALID PASSWORD": Please enter the correct password again.
2.
"REPROGRAMMING ERROR, PLEASE WAIT FOR RETRY": An error occurred during reprogramming, the Hi-Scan Pro will retry the
reprogramming automatically.
3.
"THIS ECM IS DIFFERENT TYPE": The ECM on this vehicle is not the type subject to this reprogramming procedure.
4.
"ALREADY REPROGRAMMED": The reprogramming has previously been done on this vehicle.
5.
"REPROGRAM ERROR, PLEASE CHECK THE SYSTEM": In this case, you must reprogram manually after selecting menu option "02. EF 2.7
03/04 MY Zr 02 SENSOR. [ERROR]".
