hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

PPD - Passenger Presence Detection Sensor <--> [Seat Occupant Sensor] > < Airbags - Replacement After A Collision|Page 7172
Page 1
background image

Impact Sensor: Service and Repair

REMOVAL

1. Disconnect the negative battery cable and keep secure from battery.

CAUTION:  Wait at least 30 seconds after disconnecting the battery cable before doing any further work.

2. Remove the door scuff trim.
3. Remove the center pillar lower trim.

4. Disconnect the satellite sensor connector and remove the satellite sensor.

TORQUE:  8 - 10 Nm (80 - 100 kg.cm 6 - 7.4 lb.ft)

PPD - Passenger Presence Detection Sensor <--> [Seat Occupant Sensor] > < Airbags - Replacement After A Collision|Page 7172