Sonata V6-2.7L (2004)
NOTE:
^
The Hi-Scan Pro detects the current TCM ID, assigns the new TCM ID and displays them on the Hi-Scan Pro screen.
^
Check the TCM IDs displayed on the Hi-Scan Pro screen to verify that the correct TCM software is being downloaded.
^
Refer to the "TCM SPECIFICATION TABLE" in this TSB.
^
If the Hi-Scan Pro does not download the program, use the Manual Update Procedure following this section.
WARNING:
^
Do not interrupt the reprogramming at any time.
^
The TCM will be rendered inoperative if the program does not download completely.
13.
When the "REPROGRAMMING COMPLETED!" message is displayed, the TCM reprogramming process is finished.
Press ENTER and turn off the ignition for 20 seconds.
14.
Start the engine to check for proper operation.
15.
Check for diagnostic trouble codes using the Hi-Scan Pro with system software card.
Erase all trouble codes.
MANUAL UPDATE PROCEDURE:
NOTE:
^
In the event that "01. EF 2.4/2.7 DRIVING FEEL [AUTO]" fails to download the new TCM program, option "02. EF 2.4/2.7 DRIVING FEEL
[ERROR]" must be used.
^
Confirm all connections are established as shown in the "AUTOMATIC UPDATE PROCEDURE" before continuing.
1.
Turn the ignition to the ON position.
2.
Turn the Hi-Scan Pro ON and press ENTER.
