Sonata V6-2.7L (2004)
^
The TCM will be rendered inoperative if the program does not download completely.
8.
The Hi-Scan Pro will reprogram the TCM.
NOTE:
^
The Hi-Scan Pro displays the new TCM ID on the Hi-Scan Pro screen.
^
Check the new TCM ID displayed on the Hi-Scan Pro screen to verify that the correct TCM software is being downloaded. Refer to the "TCM
SPECIFICATION TABLE" shown in this TSB.
9.
When the "REPROGRAMMING COMPLETED!" message is displayed, the TCM reprogramming process is finished.
Press ENTER and turn off the ignition for 20 seconds.
10.
Start the engine to check for proper operation.
11.
Check for diagnostic trouble codes using the Hi-Scan Pro with system software card.
Erase all trouble codes.
EXPLANATION OF ERROR MESSAGE:
1.
"INVALID PASSWORD": Please enter the exact password again.
2.
"REPROGRAMMING ERROR, PLEASE WAIT FOR RETRY": An error occurred during reprogramming, the Hi-Scan Pro will retry
reprogramming automatically.
3.
"ALREADY REPROGRAMMED " or " INCORRECT TARGET ID": This reprogramming has previously been done on this vehicle or the ECM/
TCM is not the type subject to this reprogramming procedure.
4.
"REPROGRAM ERROR, PLEASE CHECK THE SYSTEM" : In this case, you must reprogram manually after selecting the menu option "02. EF
2.4/2.7 DRIVING FEEL [ERROR]".
