Sonata V6-2.7L (2004)
4. Measure the release cylinder bore at three locations (bottom, middle, and top) with a cylinder gauge and replace the release cylinder assembly if
the bore top is on clearance exceeds the limit.
Limit
Clearance to piston: 0.15 mm (0.006 inch)
INSTALLATION
1. Coat the clevis pin with the specified grease. Align the hose at the end of the release cylinder push rod with that of the clutch release fork shaft,
and insert the clevis pin into the holes.
Specified grease: CASMOLY L9508
2. Install the clutch release cylinder and the clutch tube.
