Sonata V6-2.7L (2004)
Remove the ignition lock switch and check for continuity between the terminals. If the continuity is not as specified, replace the switch.
REASSEMBLY
1. Apply the specified grease to the clutch pedal and bushings.
Chassis grease: SAE J310a, NLGI No.1
2. Install the clutch pedal mounting bolt.
3. Apply the specified grease to the clevis pin and washer.
Wheel bearing grease: SAE J310, NLGI No.2
4. Install the push rod to the clutch pedal.
5. Adjust the clutch pedal clevis pin play.
