Sonata V6-2.7L (2004)
COMPONENTS
DISASSEMBLY
NOTE:
^
Do not disassemble the tripod assembly.
^
The driveshaft joint requires special grease Do not substitute another type of grease for it.
^
The boot clamp should be replaced with a new one.
^
The boot should be replaced with a new one.
1. Using a side cutter, cut the G.I. and A.C. big clamps and remove them.
2. Using a brass bar and hammer, remove the G.I. and A.C. small clamps.
3. Place marks on the tripod and the tulip.
NOTE: Do not punch the mark.
