Sonata V6-2.7L (2004)
14.
The Hi-Scan Pro detects the current 1CM ID and displays it for about 1 second.
15.
The boot program will download first, then the main program and the interrupt vector program.
NOTE:
If the Hi-Scan Pro does not download the program, use the Manual Update Procedure following this section.
WARNING:
Do not interrupt the reprogramming at any time. The TCM will be rendered inoperative if the program does not download completely.
16.
When the "REPROGRAMMING COMPLETED" message is displayed, the 1CM reprogramming process is complete.
17.
Turn the ignition to the OFF position for 20 seconds and then start the engine and check for proper operation.
18.
Check for diagnostic trouble codes using the Hi-Scan Pro with the system software card. Erase all trouble codes.
MANUAL UPDATE PROCEDURE:
