Sonata V6-3.0L (1991)
Technical Service Bulletin # 98-99-003
Date: 980801
Black Exterior Trim Parts - Refinish Procedures
Group: PAINT
Number: 98-99-003
Date: AUGUST, 1998
Model: ALL
Subject
BLACK EXTERIOR TRIM PARTS
REFINISH PROCEDURES
DESCRIPTION:
Sunlight and corrosive cleaners may discolor certain black exterior trim parts. HMA recommends the use of Exterior Trim Restore (ETR) by ValuGard,
which returns these parts to a new-like finish.
This TSB describes ValuGard ETR application procedures and provides warranty operation codes for its use.
PARTS INFORMATION
To obtain the ValuGard ETR kit, contact:
Automotive International Inc.
11308 Tamarco Drive
Cincinnati, Ohio 45242
Phone: 800-543-7156
Fax: 513-489-1329
WARRANTY INFORMATION
Service Procedures
This product is not a "Dressing" and the use of ValuGard ETR must be performed per the following instructions to obtain the proper results.
WARNING:
For hand protection, wear the surgical gloves similar to the pair provided with the ValuGard kit. Follow all safety precautions listed on product
containers and the material safety data sheets.
NOTE:
DO NOT apply to hot parts or while car is in direct sunlight. This may cause the product to dry too quickly and unevenly.
1.
Using soft, clean, lint free towels, clean the discolored parts with ValuGard New Car Prep to remove all waxes, silicones, grease and other
contaminants.
2.
Wipe the part dry with a soft, clean lint free towel. Make sure the part being refinished is completely dry before proceeding to the next step.
