Sonata V6-3.0L (1991)
Fig. 19 Component Bleeding
d. Loosen bleed screw and observe fluid flow, the flow will be cycled off and on with the MUT.
Caution: Fluid can flow at high pressure. Never open bleed screw without attaching flexible hose.
e. Brake pedal will n6w drop slightly as the solenoid valve closes. Continue to apply medium pressure to the brake pedal. Re-apply pedal if
required (close bleed screw during up travel of pedal).
.
f.
When fluid flows with no air bubbles, close the bleed screw and remove the plastic tube.
Tightening torque : 5.0 - 6.0 Nm.
