Sonata V6-3.0L (1991)
Brake Pad: Service and Repair
Front
Fig. 2 Exploded View Of Front Disc Brake Assembly
1.
Raise and support vehicle, then remove wheel/tire assembly.
2.
Remove two attaching bolts from torque plate, Fig. 2.
3.
Remove brake cylinder, then position aside using suitable wire.
4.
Remove brake pads.
5.
Install pads clips, then the pads onto each clip.
6.
Press piston into cylinder using suitable tool.
7.
Lower and insert brake cylinder. Tighten bolts to specifications.
Rear
Fig. 3 Exploded View Of Rear Disc Brake Assembly
1.
Raise and support vehicle, then remove wheel/tire assembly.
2.
Remove the trailing shoe key to anchor plate retaining screw, Fig. 3.