Sonata V6-3.0L (1991)
7. Using the special tool (O9231-33100), turn the crankshaft two turns in the normal rotating direction (clockwise).
NOTE: Turn smoothly, only in a clockwise direction.
8. Re-adjust the sprocket timing marks and re-tighten the tensioner locking bolts.
9. Measure the belt tension with a belt tension gauge as shown in the image.
Tension force (New): 260 - 380 N (57 - 84 lbs).
CAUTION: Position the hooks in the tooth bottoms and apply the spindle to the back of the belt.
10. As the mounting bolts of the timing cover are different in size according to location, be sure to locate them according to the image.
Thread diameter x height:
"A" 6x60 mm (0.24 x 2.36 in.)
"B" 6x20 mm (0.24 x 0.79 in.)
11. Using the special tool (09231-33200, 09231-33300), install the crankshaft pulley on the crankshaft. Tighten the crankshaft pulley bolt to the
specified torque. 150 - 160 Nm (1,500 - 1,600 kg) (108 - 116 ft lb).
