hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Tires - Defect Inspection Procedures|Page 1675 > < Tires - Defect Inspection Procedures|Page 1673
Page 5
background image

A localized detachment of the rubber stock between the block and sidewall caused by a lack or loss of adhesion where the rubber stock is joined. An
open splice may be a partial opening or a complete detachment and total perforation to the interior

Observation(s):

There should be no evidence of cuts or perforations in the open splice area. The open splice usually displays a smooth angular skive.

Prevention:

^

Maintain proper inflation pressure

^

Avoid overloading

Observation(s):

Check for tine cracks on the tire sidewall. These cracks are generally less than 1/10th of an inch in length and do not penetrate to the interior of the tire.

Prevention:

^

Store tires properly; keep tires away from direct sunlight, ozone sources, heat, wind, rain, etc.

^

Maintain proper inflation pressure

^

Avoid overloading

5.

SIDEWALL CRACKING

Tires - Defect Inspection Procedures|Page 1675 > < Tires - Defect Inspection Procedures|Page 1673