Sonata V6-3.0L (1991)
Ignition Switch Lock Cylinder: Service and Repair
STEERING COLUMN AND SHAFT
COMPONENTS
REMOVAL
1. Loosen the tapping screws and lift up the horn pad and P remove it.
2. Remove the lock nut and the washer.
3. Pulling the dynamic damper forward, lift it up and remove it. (DOHC ENG. AUTO T/M)
4. Install the special tool (09561-11001) and remove the steering wheel.
CAUTION: Do not hammer on the steering wheel to remove it; doing so may damage the collapsible mechanism.
