hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

A/T - Cooler Flushing Procedure|Page 4680 > < A/T - Cooler Flushing Procedure|Page 4678
Page 5
background image

- Improper Packaging

-

No trouble found/incorrect diagnosis

-

Comeback repair/incorrect diagnosis

-

Incomplete or missing Core Return Checklist and/or ATM Diagnosis Worksheet

Note 3:

Dealers must contact their facing PDC regarding lost packaging and paperwork.

Note 4:

Dealer Parts Department accepts full responsibility for insuring that transaxles sold over the counter:

-

Have an ATM Diagnosis Worksheet that is completely and accurately filled out

-

That the ATM cooler is flushed to HMA specifications using Hyundai Transmission Cooler Flush (part no. 00235-18100)

-

Genuine Hyundai Transmission fluid (ATF+ Type 7176 or SP-II) is used to refill the ATM

Warranty Information

NOTE:

*The ATM oil cooler and hoses must be flushed prior to installation of the replacement remanufactured ATM. If a thorough flushing is not
performed, the remanufactured ATM can be contaminated by debris left in the cooler and hoses, resulting in shop comebacks and possible claim
chargeback.

**Diagnostic before and after readings/measurements must be recorded on the ATM Diagnosis Worksheet whenever the ATM Tester, Scan Tool, or
HDS is used. The Worksheet (canary copy) must be retained with the shop copy of the RO. In addition, if the HDS is used, a printout of the readings
must also be retained with the shop copy of the RO.

 

A/T - Cooler Flushing Procedure|Page 4680 > < A/T - Cooler Flushing Procedure|Page 4678