Sonata V6-3.0L (1991)
Wiper Motor: Service and Repair
Fig. 5 Front Wiper Motor & Linkage Assembly
1.
Remove cowl top cover, then the air inlet garnishes, Fig. 5.
2.
Remove wiper motor assembly, then disconnect linkage from motor assembly and remove linkage assembly. Mark position of crank arm to
wiper motor, if necessary to remove.
3.
Reverse procedure to install. When installing wiper arm and blade assembly, ensure wiper blade is 1.1-1.3 inches above bottom of
windshield, with wiper motor in Park position.
