Sonata V6-3.3L (2006)
NOTE:
-
Use the door switch to align the mounting hole with the hole on the door glass.
-
If it is impossible, align the hole with hands after removing the motor
2. Carefully move the glass (A) until you can see the bolts, then loosen them. Separate the glass from the glass run and carefully pull the glass out
through the window slot (B).
CAUTION: Take care not to drop to glass and scratch the glass surface
3. Installation is the reverse of removal.
NOTE:
-
Roll the glass up and down to see if it move freely without binding.
-
Adjust the position of the glass as necessary.
POWER WINDOW MOTOR REPLACEMENT
1. Remove the front door trim.
2. After disconnecting the connector (A), remove the power window motor (B).
3. Installation is the reverse of removal.
NOTE: Roll the glass up down to see if it move freely without binding.
OUT SIDE HANDLE REPLACEMENT
1. Remove the following parts.
-
Remove the front door trim.
-
Remove the glass.
-
Remove inside handle.
