Sonata V6-3.3L (2006)
Brake Pad: Testing and Inspection
Inspection of Front Disc Brake Pad
INSPECTION OF FRONT DISC BRAKE PAD
1. Check the brake pad thickness through the caliper body inspection hole.
Pad thickness
Standard value: 11.0 mm (0.43 inch)
Service limit: 3 - 4 mm (0.12 - 0.16 inch)
CAUTION: If the pad lining thickness is out of specification, left and right pads must be replaced as a complete set. When the thickness
difference between the left pad and right pad is large, check the sliding condition of the piston and the guide rod.
