Sonata V6-3.3L (2006)
1. Disconnect the brake hose (c) from the brake line (A) using a flare-nut wrench (B).
2. Remove the bracket mounting bolt (A), and then remove the brake hose (B).
3. Remove the connector bolt from the caliper, and disconnect the brake hose from the caliper.
INSTALLATION
1. Install a brake hose on the caliper with tightening brake hose bolt.
2. Install the bracket and the brake hose mounting bolt.
3. Connect the brake hose (A) to the brake line.
4. After installing the brake hose, bleed the brake system.