Sonata V6-3.3L (2006)
2. Remove drive belt (A).
3. Remove the 4 bolts and pump pulley (A).
4. Remove the water pump (A) and gasket.
INSPECTION
1. Check each part for cracks, damage or wear, and replace the coolant pump assembly if necessary
2. Check the bearing for damage, abnormal noise and sluggish rotation, and replace the coolant pump assembly if necessary
3. Check for coolant leakage. If coolant leaks from hole, the seal is defective. Replace the coolant pump assembly
NOTE: A small amount of weeping from the bleed hole is normal.
INSTALLATION