hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Lighting - Brake Lamps Inoperative/DTC's P0504/C1513|Page 12302 > < Recall 09V122000: Brake Lamp Switch Replacement
Page 1
background image

Brake Light Switch: All Technical Service Bulletins
Lighting - Brake Lamps Inoperative/DTC's P0504/C1513

Group: BODY ELECTRICAL

Number: 08-BE-005

Date: JULY, 2008

Model: 2006 SONATA

Subject:
STOP LAMP SWITCH ADJUSTMENT

THIS BULLETIN SUPERSEDES TSB 06-50-006 TO INCLUDE THE CORRECT
DESCRIPTION OF COMPONENTS.

DESCRIPTION:

This TSB describes the procedure to adjust the stop lamp switch. In most cases, proper adjustment of the stop lamp switch will resolve DTC's P0504
(brake switch) and C1513 (brake light switch) without replacing the stop lamp switch.

If the vehicle exhibits inoperative brake lights or DTC codes P0504 or C1513 use the following procedure to ensure proper diagnosis.

NOTE:

Two stop lamp switches have been installed on 2006 Sonatas. The switches are interchangeable.

NOTE:

Vehicles with a VIN starting with 5NPEU produced before 8/19/05 have a metal housing (left), vehicles produced on or after 8/19/05 have a plastic
housing (right).

NOTE:

Vehicles with a VIN starting with KMHET produced before 4/28/05 have a metal housing (left), vehicles produced on or after 4/28/05 have a plastic
housing (right).

COMPONENTS:

SERVICE PROCEDURE:

1.

Check the clearance between the stop lamp switch housing and the brake pedal when the pedal is in the free position.

Specification: A-B = 0.5 - 1.0 mm (0.02~0.04 in)

Lighting - Brake Lamps Inoperative/DTC's P0504/C1513|Page 12302 > < Recall 09V122000: Brake Lamp Switch Replacement