Sonata V6-3.3L (2006)
A - Stop Lamp Switch Metal Housing
B - Brake Pedal Stopper
2.
If the clearance is within specification and the stop lamp switch continues to not function properly, check the operation of the switch.
3.
Remove the stop lamp switch by loosening the brake switch lock nuts. Depress the stop lamp switch plunger manually and see if the brake lights
function properly.
4.
If the stop lamp switch does not function properly, check the continuity of the stop lamp switch.
5.
Disconnect the stop lamp switch connector.
6.
Check the continuity of the stop lamp switch by connecting the multimeter to the upper contacts.
7.
With the plunger not depressed, the meter should read approximately 0 ohms, has continuity.
8.
Depress the stop lamp switch plunger. Multimeter should read open circuit (no continuity).
9.
Connect the multimeter connectors to the lower contacts on the stop lamp switch.
10.
With the plunger not depressed, the meter should read open circuit (no continuity).
