Sonata V6-3.3L (2006)
Wheel Cover: All Technical Service Bulletins
Wheels - Aluminum Wheel Cap Replacement
ALUMINUM WHEEL CAP REPLACEMENT
MODEL: 2006 SONATA
DESCRIPTION:
The aluminum wheel cap acrylic "H" logo may separate when exposed to elevated temperatures. If this occurs on a vehicle, replace all four wheel caps at
the same time.
VEHICLES AFFECTED:
Model: SONATA(NF)
Affected vehicle production date range:
Start of production through October 1st, 2005
PARTS REQUIRED:
REPAIR PROCEDURE:
1. Drill a hole in the wheel cap large enough to insert a screw driver or pick. A 1/4" drill bit is recommended.
CAUTION:
Use care not to damage the wheel or hub under the wheel cap.
WARNING:
Wear eye protection when operating a drill.
2. Insert a screwdriver or pick into the hole and carefully pry the wheel cap from the wheel.
CAUTION:
Use care not to scratch the wheel during cap removal.
WARNING:
