Sonata V6-3.3L (2006)
8.
Enter the password (3760) and press ENTER.
9.
The Hi-Scan Pro will establish communication, check the TCM ID, and reprogram the TCM automatically.
NOTE:
^
The Hi-Scan Pro detects the current TCM ID, assigns the new TCM ID and displays them on the Hi-Scan Pro screen.
^
Check the TCM ID displayed on the Hi-Scan Pro screen to verify that the correct TCM software is being downloaded
(NF5N33*S2AS5E1BC).
WARNING:
Do not interrupt the reprogramming at any time.
10.
When "REPROGRAMMING COMPLETED" message is displayed, turn the Hi-Scan Pro OFF.
11.
Turn the ignition key OFF for about 20 seconds and start the engine to confirm proper operation of the vehicle.
12.
Check for diagnostic trouble codes using the Hi-Scan Pro with the system software card and erase any trouble codes.
CAMPAIGN CLAIM INFORMATION
