Sonata V6-3.3L (2006)
Body Control Module: Component Tests and General Diagnostics
INSPECTION
Verify each components operation using related timing charts.
1. TAIL LAMP AUTO CUT
1. With the tail lamp switched ON, if the ignition is switched OFF and the driver's door opened, the tail lamp should be automatically turned
OFF.
2. With the ignition switch ON, if the driver's door is opened and the ignition is switched to OFF, the tail lamp should be automatically turned
OFF.
3. When the tail lamp is cut automatically and the tail lamp switch is turned OFF and ON, the tail lamp illuminates and auto cut function is
cancelled.
4. When the tail lamp is cut automatically and the ignition key is inserted, the tail lamp illuminates and auto cut function is canceled.
2. IGNITION KEYHOLE ILLUMINATION
1. Ignition keyhole illumination is turned ON when the driver or passenger door is opened.
2. The "ON" state for ignition keyhole illumination is delayed 10 seconds when the door is closed as in Step 1).
3. Ignition keyhole illumination is turned off if the ignition switch is turned ON as in Step 1) & 2).
4. Ignition keyhole illumination is turned off if ARM state is entered. See Steps 1) & 2).
3. DELAYED ROOM LAMP
1. When the first door (driver, or assist or 4doors) is opened, room amp is turned on.
2. When the door is closed, the room lamp is faded out for 2 seconds after there is on for 30 seconds.
3. Regardless of ignition ON/OFF in door open state, room lamp output is ON.
4. When remote control unlock is received, room lamp is turned on for 30 seconds
