Sonata V6-3.3L (2006)
4. After 6 sec from IGN ON, warning lamp continues to flash when S/BELT is unfastened and stop immediately when S/BELT is fastened.
16. AUTO LIGHT CONTROL
1. Auto light sensor value is always read at IGN ON.
2. Light is turned ON after 2 sec ± 0.2sec when auto light sensor value is same as light ON input value.
3. Light is turned OFF after2 sec ± 0.2sec when sensor value is same as light OFF input value.
4. Tail lamp and head lamp are turned ON when sensor value is same as tail lamp ON input value.
5. Light ON value of sensor is based on the below table.
6. Head lamp signal is output when head lamp switch is ON.
7. After head lamp is turned OFF, head lamp signal output is kept if head lamp ON luminance condition is met at auto light switch ON.
8. After head lamp is turned OFF, head lamp signal output is immediately stopped if head lamp OFF luminance condition is met at auto light
switch ON.
9. After head lamp is turned OFF, head lamp signal output is immediately stopped at tail switch signal input.
10. After head lamp is turned OFF, head lamp signal output is stopped after 0.7 sec. if there is no input of auto light switch or tail switch. (Shall be
no flashing of head lamp)
11. Head lamp signal output is stopped when switch position is changed from AUTO to head lamp switch during head lamp ON with auto light.
(Shall be no flashing of head lamp)
12. The condition of head lamp ON/OFF is same as the one of tail lamp ON/OFF at auto light switch ON. Light ON value of the input sensor is
based on the table.
