Sonata V6-3.3L (2006)
1. Remove oil temperature sensor following the appropriate service manual.
2. Clean off any loose residue from the sealing threads of the oil temperature sensor.
3. Wipe clean the oil port and surrounding areas of the cylinder head.
4. Apply a small amount of Permatex(R) High Temperature Thread Sealant (#56521) or equivalent to the oil temperature sensor threads.
NOTE:
Follow the appropriate application directions of the sealant product to allow sufficient curing time before reassembly.
5. Reassemble the oil temperature sensor and torque to 22 lb-ft (30Nm).
6. Start engine to verify repair.
WARRANTY INFORMATION
