Sonata V6-3.3L (2006)
Alignment: Technical Service Bulletins
Alignment - Front Toe-In Adjustment Caution
Group: CHASSIS
Number: 06-50-017
Date: DECEMBER, 2006
Model:
AZERA (TG) AND SONATA (NF)
Subject:
FRONT WHEEL TOE-IN ADJUSTMENT CAUTION
DESCRIPTION:
This bulletin describes the correct position of the tie rod end for Azera (TC) and Sonata (NF) vehicles.
During toe-in adjustment, the tie rod end (B) may move towards the stabilizer bar link (A) and reduce the clearance between the two parts as shown.
After toe-in adjustment, tighten the tie rod end lock nuts firmly then rotate the tie rod end with a wrench to increase clearance as shown.
NOTE:
Minimum clearance between the tie rod and the stabilizer bar link may cause an interference noise when the steering is turned fully or the vehicle is
driven over uneven or rough road surfaces.
