Sonata V6-3.3L (2006)
5. Using the special tools (09216-21600, 09216-22100), remove the wheel bearing outer race from the knuckle.
INSPECTION
1. Check the hub for cracks and splines for wear.
2. Check the snap ring for cracks or damage.
3. Check the knuckle inner surface for scoring and cracks.
REASSEMBLY
1. Apply a thin coat of multi-purpose grease to the knuckle and bearing contact surface.
2. Using the special tool (09216-21100), press-in the bearing to the knuckle.
NOTE:
^
Do not press against the inner race of the wheel bearing because that can cause damage to the bearing assembly.
^
Always use a new bearing assembly.
3. Install the snap ring into the groove of the knuckle.
4. Using the special tool (09545-21100), press the hub on to the knuckle.
NOTE: Do not press against the outer race of the wheel bearing because that can cause damage to the bearing assembly.
