Sonata V6-3.3L (2006)
7. Install the brake hose (A), the parking brake cable (B), and the wheel speed sensor (C).
8. Install the muffler (A).
9. Install the wheel, and the We to the rear hub.
Tightening torque: 90 - 110 Nm (11 kgf-cm, 65.1 - 79.5 ft. lbs.)
CAUTION: Be careful not to damage the hub bolts when installing the rear wheel and tire.
Removal
REAR LOWER ARM
REMOVAL
1. Loosen the wheel nuts slightly. Raise the rear of the vehicle, and make sure it is securely supported.
2. Remove the rear wheel and tire from rear hub.
CAUTION: Be careful not to damage the hub bolts when removing the rear wheel and tire.
3. Remove the lower arm bolt (A) from the rear axle assembly (B), while supporting with a jack as shown.
