Sonata V6-3.3L (2006)
4. Remove the spring (A), the lower seat, and the upper pad.
5. Remove the lower arm mounting bolts (B) from the cross member (C).
Inspection
REAR LOWER ARM
INSPECTION
1. Check the bushing for wear and deterioration.
2. Check the center arm for bending or breakage.
3. Check the bolts for damage. SPRING
1. Check the spring for distortion, aging or damage.
2. Check the spring upper pad for aging or damage.
Installation
REAR LOWER ARM
INSTALLATION
1. Install the lower arm mounting bolts (B) to the cross member (C) with a specified torque.
Tightening torque 110 - 120 Nm (11 - 12 kgf-cm, 79.5 - 86.8 ft. lbs.)