Sonata V6-3.3L (2006)
f.
Remove the front driveshaft assembly (A) with the inner shaft from the transaxle.
CAUTION: Do not try to disconnect the inner shaft from the driveshaft. Because they can not be disconnected once assembled. Do not reuse
the driveshaft which is disassembled from the inner shaft.
10. Using the special tool (09432-11000), remove the tone wheel.
INSPECTION
1. Check the driveshaft boots for damage and deterioration.
2. Check the splines for wear and damage.
3. Check the ball joints for wear and operating condition.
INSTALLATION
CAUTION: Replace the circlip with now ones after removal.
1. Apply gear oil on the drive shaft splines (A) and the contacting surface of differential case oil seal (B).
