Sonata V6-3.3L (2006)
2. Remove the circlip using screwdriver. (ASAN) KOREA
3. Remove the driveshaft from SFJ outer race.
4. Remove the snap ring and disassemble the spider assembly from the shaft.
5. Clean the spider assembly
6. Remove the BJ boot band and removal of the SFJ boot and the BJ boot.
CAUTION: If the boot is reused, wrap a tape around the driveshaft splines to protect the boot.
INSPECTION
1. Check the driveshaft spline part for wear.
2. Check for entry of water and foreign material into boot.
3. Check the spider ring for revolution and wear.
