Sonata GL V6-2.5L (1999)
3. Inspect the brake lining and drum for proper contact.
4. Inspect the wheel cylinder outside for excessive corrosion and damage.
5. Inspect the backing plate for wear or damage.
INSTALLATION
1. Apply the specified grease to the locations indicated in the illustration and to each component.
-
Shoe and backing plate contact surfaces
-
Shoe and anchor plate contact surfaces
Recommended grease: Multipurpose grease SAE J31 0, NLGI No.2
2. Install the shoe hold down pin.
3. Assemble the return spring with the push rod shortened.
CAUTION: Split pin and hub cap must not be reused.
4. Check the outside dimension and correct it using auto-adjuster (227.6 - 228.1 mm).
5. Do the parking brake stroke adjustment after assembling lining.
